biodieselpictures.com Forum Index biodieselpictures.com
A Free Place To Share Pictures Of Your Biodiesel Equipment!
Sponsored by Utah Biodiesel Supply
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Schematic for Drewry's Push/Pull

 
Post new topic   Reply to topic    biodieselpictures.com Forum Index -> Processor Equipment
View previous topic :: View next topic  
Author Message
jheron



Joined: 11 Jun 2008
Posts: 31
Location: Wellington County Ontario Canada
PostPosted: Sat Oct 04, 2008 2:12 pm    Post subject: Schematic for Drewry's Push/Pull Reply with quote
I know, my fine art leaves something to be desired! Laughing
The main contactor should be HP rated and good for 60A. The 2 4500 watt heaters draw allot of current... about 38 amps.
Make sure the 2 motor switches are rated for the motors HP and use a 2 pole switch on the 240V motor like This I know it doesn't mention the HP rating but just look for the ratings when its in your hands! I am sure this switch has a 2HP rating at 240V.
I would recommend a nice 12X12X6 E box for the control panel They are cheap and will work well for this. I highly recommend using quality power fuses such as These.
Quality cords and connectors should also be used like SJ or SOOW etc..
Good luck!
Jon

DrewrysSch.jpg
 Description:
 Filesize:  687.7 KB
 Viewed:  1605 Time(s)

DrewrysSch.jpg
Back to top
View user's profile Send private message
jheron



Joined: 11 Jun 2008
Posts: 31
Location: Wellington County Ontario Canada
PostPosted: Fri Dec 25, 2009 5:13 pm    Post subject: Reply with quote
Bob_98SR5 made an easier to read version of my hen scratchings Laughing
Thanks Bob!

Drewreys_shematic.jpg
 Description:
 Filesize:  231.67 KB
 Viewed:  164 Time(s)

Drewreys_shematic.jpg
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    biodieselpictures.com Forum Index -> Processor Equipment All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group