biodieselpictures.com Forum Index biodieselpictures.com
A Free Place To Share Pictures Of Your Biodiesel Equipment!
Sponsored by Utah Biodiesel Supply
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Used Canola Oil Feed Tote

 
Post new topic   Reply to topic    biodieselpictures.com Forum Index -> Processor Equipment
View previous topic :: View next topic  
Author Message
Legal Eagle



Joined: 07 Dec 2006
Posts: 8
Location: The Great White North

PostPosted: Thu Dec 28, 2006 12:07 am    Post subject: Used Canola Oil Feed Tote Reply with quote

This is the new used canola oil feed tote. It is set on a pedestal rack made of 3 inch angle iron with 3 inch oil pipe with it's flanges sitting on individual concrete footings sunk 18 inches into the ground.


pumpin.jpeg
 Description:
Inside the reactor house where the pipe has gone through the wall is a 1" clear water pump waiting to accept the used canola oil to be fed to the pre heat tank. The oil is prefiltered before going into the tote.
 Filesize:  81.98 KB
 Viewed:  4354 Time(s)

pumpin.jpeg



totefeed2.jpeg
 Description:
This is a step back where we can see the stand on which the tote is sitting. The heater element plugs into the socket up on the wall. This socket is controled inside by a breaker switch. The Benz is on the left.
 Filesize:  111.35 KB
 Viewed:  4354 Time(s)

totefeed2.jpeg



totefeed1.jpeg
 Description:
A close up of the manifold in place, connected to the feed line going through the wall.
 Filesize:  114.84 KB
 Viewed:  4354 Time(s)

totefeed1.jpeg



camlocktote.jpeg
 Description:
Installed outside, the manifold attaches using a camlock connector
 Filesize:  115.17 KB
 Viewed:  4354 Time(s)

camlocktote.jpeg



feedmanifold2.jpeg
 Description:
Here you can see the butt end of the heating element inside the pipe.
The heater is inside a black iron pipe whci is insulated with hot water puipe insulation and then set inside a 2 inch PVC pipe.
 Filesize:  111.44 KB
 Viewed:  4354 Time(s)

feedmanifold2.jpeg



feedmanifold1.jpeg
 Description:
This is the feed manifold. It has a water heater element running inside it vertically.
 Filesize:  111.79 KB
 Viewed:  4355 Time(s)

feedmanifold1.jpeg



_________________
*My Biodiesel Reactor
http://www.b100wh.com
**7 engines running on B100
http://www.blackcrownsoap.com
**Make and sell soap from the glycerine layer
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    biodieselpictures.com Forum Index -> Processor Equipment All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group